BETICO is a brand of the Spanish MIGUEL CARRERA Y CIA., S.A. , which is a company with traditions in the production of high quality air compressors since 1925. The company’s factories are located in the city of Vitoria – northern Spain and “Betico” in the Basque language means FOREVER. The SB series of BETICO is a low-pressure, high-reliability piston air compressors with oil, designed for pneumatic transport of granulated and powdered products. The company Stroi Sped has a service base and spare parts in stockfor the BETICO compressors.

 

With belt pulley

betico1

The compressor is equipped with a belt-pulley flywheel for driving by the Power Take-Off of the rigid vehicle. This compressor is mounted on a frame on the rear of the rigid vehicle. The compressor is simplified for installation and only needs to be connected with belts to the PTO of the vehicle.

Technical characteristics:

Model Flow rate l/min Pressure bar Power kw
SB-1 5800 2 15.4
SB-1 8700 2 24.2
SB-2 7380 2 20.6
SB-2 8800 2 24.7

 

With electric motor

betico4

This compressor is equipped with a control panel and a regulator that controls the working pressure over a long period according to the specified requirements. Compressors of this type are very convenient for unloading bulk cargoes from heavy trucks at places where there is an adequate power supply, as well as for permanent technological installations for all types of industry.

Technical characteristics:

Model Flow rate l/min Pressure bar Power kw Engine type
SB-10D 5800 2 18.5 IP-54
SB-15D 8700 2 30.0 IP-54
SB-20D 7300 2 22.0 IP-54
SB-30D 11600 2 37.0 IP-23
SB-35D 17400 2 55.0 IP-23
SB-40D 14600 2 45.0 IP-23

 

With motor DEUTZ

betico2

Compressors of this type are usually mounted on the tank and are independent of the rigid vehicle. It is a reliable complete unit fitted with a pressure control panel, an accumulator, a fuel tank, as all this is mounted on a frame for comfortable fitting.

Technical characteristics:

Model Flow rate l/min Pressure bar Power kw Engine type
SB-D 8900 2 24.3 F3L912
SB-SD 8900 2 24.3 F4L2011
USB3-4D 14600 2 48.4 F6L912

 

With hydraulic motor

betico3

The compressor is combined with a frame-mounted hydraulic motor. It is equipped with a hydraulic oil cooler. The compressor is of small size and a low noise level, ideal solution if your vehicle is equipped with a hydraulic pump.

Technical characteristics:

Model Flow rate l/min Pressure bar Power kw Engine type
SB-1H 10400 2 28.0 Volvo

 

Addresses and telephones Transport inquiry Feedback